收藏本站
Using External Power
Connect the external power supply but leave the target turned off. The emulator status LED should glow a
STEADY RED, indicating the presence of emulator power but not target power. If not, disconnect the
emulator power and refer to the troubleshooting tips below to correct the problem before continuing.
-
-
-
-
Verify the external power supply is properly connected and plugged into a powered socket.
Verify the external power supply is providing a regulated 5VDC at 300ma or more.
Verify the external power supply is wired correctly (center is positive, ring is ground).
Disconnect the target cable and re-apply emulator power. If the LED now GLOWS RED, the
target wiring, adapters or cabling are incorrect.
Turn on target power. The emulator status LED should change from a steady RED GLOW to a steady
GREEN GLOW. If not, refer to the troubleshooting tips below before continuing.
LED Turns OFF:
Something is VERY wrong with the target wiring, cables or adapters.
Immediately turn off target power and then emulator
power. Correct the problem before reapplying power!
LED STAYS RED:
The emulator did not sense at least 3V from the target power pins.
-
-
-
-
Verify all target cable connections
Verify the target cable is plugged in correctly (pin 1 orientation)
Verify that any adapters you might be using are the correct pin-outs.
Verify your ACM is properly configured.
LED Flashes GREEN:
The emulator detected the target’s power, but the reset line is not properly connected. When the emulator is
first powered up, it asserts RESET to keep the target from running until it has received a download. The
flashing GREEN LED indicates target activity.
-
-
-
Verify the RESET line is connected
Verify your selection of the RESET attachment point
Verify your selection of RESET polarity.
FlexROM III User’s Manual
9
Copyright ? 2001, TechTools
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
FS-9062 JTAG_BOOSTER FOR ANALOG DEVICES
FS-977 JTAG-BOOSTER FOR 386EX 3.3V
FS1-R26-2000 CONN RECEPT MINI SAS 26POS SMD
FS1-R26-2001 CONN RECPT SAS MINI 26POS SMT
FS1-S01-146E1 CONN SNGL M-SAS CAGE KEY 4,6 P1
FS1-S02-1D66E1 CONN MINI SAS CAGE 1X2 R/A SMT
FS1-SF1-14E1 CONN SNGL M-SAS CAGE KEY 4 P0
FS1-SF2-14E1 CONN DUAL M-SAS CAGE KEY 4 P0
相关代理商/技术参数
FR34 制造商:FCI 制造商全称:First Components International 功能描述:3.0 Amp FAST RECOVERY PLASTIC RECTIFIERS
FR3492-D 制造商:BACO Controls Inc 功能描述:
FR3492-D1 制造商:BACO Controls Inc 功能描述:
FR3492-D2 制造商:BACO Controls Inc 功能描述:
FR3492-D3 制造商:BACO Controls Inc 功能描述:
FR3492-D5 制造商:BACO Controls Inc 功能描述:
FR3492-D6 制造商:BACO Controls Inc 功能描述:
FR3492-D7 制造商:BACO Controls Inc 功能描述: